CIPET is an ISO 9001:2008 QMS, NABL, ISO/IEC 17020 accredited premier national Institution devoted to Academic, Technology Support & Research (ATR) activities for the growth of Plastics & allied industries in the country. CIPET operates on hub & spokes model with 22 locations spread across the length & breadth of the country. CIPET has 15 centres at Ahmedabad, Amritsar, Aurangabad, Bhopal, Bhubaneswar, Chennai, Guwahati, Hyderabad, Hajipur, Haldia, Jaipur, Imphal, Lucknow, Mysore and Panipat. All the CIPET centres have state of art infrastructural facilities in the areas of Design, CAD/CAM/CAE, Tooling & Mould Manufacturing, Plastics processing, Testing and Quality control to cater to the needs of plastics & allied industries in the country.
I AM DIPLOMA ELECTRICA;L
are AR rahman ki job lage he??????CTC1150 tur ki kora???notun buraku chanch dibo lage
I am Instrumentatio diploma engg. having 1 year experience as DET at 13.8 MW Captive Power Plant in Shyam Century Ferrous Ltd. If recruiter show my comment, and have there vacancy for me, reply to me at 09854446247/07308946465
I AM DIPLOMA ENGINEER IN MECHANICAL
hello sir,
i am abdul shafiqul wahed had complited my pgdppt from cipet ghy in the 2000….may i apply the job…pls reply me at [email protected]
regards
abdul
I am a B.SC. CIPET from GHY with 4.5 years experience on production of polymer.
Please any job related information reply me at
[email protected]
Regards
Bitopon Borah
I am 3years diploma in mechanical engineering. I have level-II in UT,MT,PT,RT. Also I have 3 years experience in construction job. Now I am working in UB Engineering Ltd as Astt. Engg.
1. NAME : NITUMANI TALUKDAR
2. FATHER`S NAME: Mr. DILIP TALUKDAR
3. DATE OF BIRTH: 18TH NOVEMBER, 1990
4. NATIONALITY: Indian
5. GENDER: Female
6. MARITAL STATUS: Single
7. MOTHER TONGUE: Assamese
8. PRESENT ADDRESS: B-36, CHANDAKA INDUSTRIAL AREA,BHUBANESWAR,PIN:751024
9. PERMANENT ADDRESS: PATHSALA WARD NO-3. P.O: PATHSALA.
District: BARPETA (Assam).Pin:781325
10. CONTACT NO : +918908636837, +918876751947
9. E mail: nitumonitalukdar3 @gmail.com
10. OBJECTIVE: to get involved with the work related to Product design, mould/tool design and mould making to apply my past individual skills to meet the present challenge of the industry.
11. EDUCATIONAL QUALIFICATION:
SI NO Academic qualification Board Passing
Year Percentage
1. H.S.L.C SEBA 2007 69%
12. TECHNICAL QUALIFICATION:
Sl NO Diploma Institute Year of passing Percentage
1. Post-Diploma in CAD -CAM CENTRAL TOOL ROOM &TRAINING CENTRE,BHUBANESWAR
(ISO 9001:14001,OHSAS 18001,AS 9100 CERTIFIED) Pursuing
2. Post diploma in plastics mould technology CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY,GUWAHATI 2011 72.02%
13. OTHER QUALIFICATION:
1. Short term course in BASICS OF AUTO- CAD
2. Short term course in PRO-E SOFTWARE
3. Short term course in FUNDAMENTALS OF COMPUTER APPLICATION
14. EXPERIENCE:
a. Exposure in making moulds and design of INJECTION MOULD, COMPRESSION MOULD, BLOW MOULD, TRANSFER MOULD, THERMOFORMING MOULD and SPLIT MOULD.
b. Handled machines- LATHE, MILLING, SHAPPER, DRILLING, PANTOGRAPH, GRINDING, POWER HACKSAW, CNC Lathe, CNC Milling, CNC EDM, CNC Wire cut.
c. Knowledge in fitting, assembling, mould making & maintenance
d. Exposure in JIGS & FIXTURES.
e. Knowledge about Plastics material and its processing and Testing.
15. SKILLS:
a. Adhere to safety rules and regulation.
b. Active, responsible, loyal, honest and open minded person.
c. Always ambitious to learn new things.
d. Excellent communication skills.
e. Goal oriented and self motivated.
Declaration
I do hereby declare that all the above statements are true to best of my knowledge and belief.
DATE: .10.03.2012 YOUR’S FAITHFULLY
NITUMANI TALUKDAR
i am diploma pass in tool and die making from igtr,ahmedabad and having 2 years experience in skf tech. pvt ind ltd. there have any vacancy please reply me………9957310602
Dear Sir/Madam,
Having come to know that there is a vacancy in your company. I beg to offer myself as a candidate of such post. I hope that it can opportunity is granted to me to serve in your esteemed organization, I shall try my level best to satisfy my Superior. I shall try best for the company. My personal Bio-data is attached with Application.
Now I am working as a TOOL ROOM in charge with Aroma Industries.
Waiting for a favorable reply and mean while thinking you in anticipation.
Thanking you
Md.Akbar khan
Mob. No. – 9038445572/ 8609400978
Email- [email protected]
Software Skills
Name Version
CATIA V5 R17
UNIGRAPHICS (CAD & CAM) NX 5.0
MASTER CAM X2
MECHANICAL DESKTOP (MDT) 2006
MTS 1.0
AUTO CAD 2004 & 2006
Professional experience:
• Previous Working exp. as a PRODUCT DEVELOPMENT & VENDOR DEVELOPMENT Engineer with Sanjay Techno Product pvt ltd, Aurangabad, Maharashtra Since JUL -09 to Aug-10.
• Previous Working exp. as a Development Egg. with VIDEOCON INDUSTRIES LTD. Aurangabad,Maharastra Since Sep-10 to Feb.-11
• Presently working as a TOOL ROOM INCHARGE with AROMA INDUSTRIES PVT.LTD.Hooghly,West Bengal since Feb.-11 to till date.
Responsibilities:
? Development of new Plastic Molded parts by APQP process & hand over to Production Department.
? Product Costing & Finalizing.
? Negotiations with Supplier for the quotation finalization of new development.
? Preparation of Development Time activity Plan, & achieving the Targets of development.
? Attaining various “Quality system” Programs to expose the company for various Quality Tools.
? Preparation of Validation Reports for testing
? Preparation of BOM.
? Daily Rejection analysis and process improvements by using QC Tools.
? Customer complaint handling in Development phase as well as for regular production.
? Training & awareness of Quality aspects in Product Development Department.
? Conduction & preparation of PPAP document of about 5-6 components.
? Attaining the training on TPM
? Training of operators for new product
Personal Details:
Name Md.Akbar Khan
Date of Birth 16th feb.1987
Father’s name Lt.Nurmahammad Khan
Marital Status Single
Sex Male
Nationality ndian
Languages Known English, Hindi, Bengali
Mailing Address Vill-Dighasipur
P.O-Chakdwipa
P.S.-Bhabanipur
Dist.-Purba Medinipur (Haldia)
Pin.-721666
West Bengal
i have completed three years diploma in instrumentation engg 2006
i’m Deepak from panipat.i have complete dpmt 1st class in cipet panipat.i want a gud job in cipet .pls concern this job.my no.09034197984 and email i.d [email protected]
I am diploma in mechanical and i hv also experience of two years and i want to doing job in yr company plz invite me……thankyou
sunil sharm,a studies cipet guwahati worked at john deere india pvt ltd
Respected Sir,
I, Pranjit Basumatary have been completed my diploma from CIPET, Jaipur (Raj) . Duration:- 2008 to 2011, course:- DPT. Sir is there any vaccancy in CIPET, Guwahati for fresher student.
iI got back at cipet. what will happen now? will iI get 1st class if iI pass in the back? please reply
CURRICULAM-VITAE
E-mail ID: [email protected]
AMIT SARKAR
Mob. No.+919635149906 & +919438567224
OBJECTIVE:-
Looking for a challenging career, which demands the best of my professional abilities. A job which will help me in upgrading my current skills and knowledge and where I can have a good scope for learning & implementing new technologies for contributing in company growth.
Educational qualification:-
1. 10th WBBSE 2008 58.97
Technical Qualifications:-
1.
Diploma in Plastics Mould Technology
(DPMT)-
Central Institute Of Plastics Engineering & Technology, (CIPET)
(Govt.of India)Haldia, W.B, (2008-2011)
1st year 1stsem. 76.57
2nd sem. 73.42
2nd year 3rd sem. 69.00
4th sem. 66.83
3rd year 5th sem. 70.22
6th sem. 66.29
2. Post Diploma in tool Design & Manufacturing (PDTDM) Central Tool Room & Traning Center
(CTTC)
(Govt.of India)
Bhubaneswar,0rissa
(2012-2013)
COMPLETED
•Naw i am douing a job in CTTC (BBSR)
SOFTWARE SKILL :- MS-office 98-2007 & 2010
DESIGN SKILL:- AUTO-CAD 2006 & 2010, PRO-E, MASTER CAM X5, UG NX7.5 & UG NX 8, PART PROGRAMING, CATIA
CNC M/C :- CNC MILLING(HAAS) & TURNING, EDM DIE SINKING, EDM WIRE CUT
PROJECT UNDERGONE DURING 6TH SEM [:-
? DESIGN & DEVELOPMENT AUTOMATIC UNSCREWINING INJECTION MOULD OF WATER TAP (TWO IMPRESSION)
TECHNICAL EXPOSURES:-
? Mould Design & Drafting
? Plastics Materials & Applications
? Plastics Conversion Techniques: Injection Molding, Extrusion, Blow Molding, Rotational Molding, Compression Molding etc.
? Conventional m/c& machining(Lathe,Milling,Drilling,Grinding)
? Design of Jigs & Fixture
? Study of Plastics Properties (e.g. Mechanical, Electrical, Thermal, Optical, Rheological etc.)
? Mechanics & Hydraulics
? Metallurgy& Heat treatment
? Processing
STRENTH:-
• Hard working
• Self discipline
• Team work
PERSONAL DETAILS:-
Name : AMIT SARKAR
Father’s Name : ANIL KUMAR SARKAR
Date of Birth : 08-12-1992
Gender : Male
Nationality : Indian
Communication Language : English,Hindi,Bengoli,
PERMANENT ADDRESS:-
AMIT SARKAR
S/O- ANIL KUMAR SARKAR
Vill – JAYGRAM
P.O-CHAKPATLI
P.S.-HASNABAD
Dist.-24-PGS (NORTH)
State- WEST BENGAL
Pin code-743426
DECLEARATION:-
I do hereby declare that all the statements furnished above in the application are true, complete and correct to the best of my knowledge and belief.
AMIT SARKAR
Signature of applicant